16 May 2012 
Support Center » Knowledgebase » Digital Signage » Mvix Ceeno » How do I setup Mvix Ceeno for Indpendent Mode Operation
 How do I setup Mvix Ceeno for Indpendent Mode Operation
Solution

Mvix Ceeno can also be configured to play a playlist via the Independent Mode. During Independent mode operations, the media player does not require any network connectivity for operations and content updating.

The independent mode allows the following functionalities:

  • Auto-Power On: The DS Player is powered on as soon as the power cable is connected and switched on.
  • Auto-Boot: The DS Player boots into a Playback mode automatically. In this mode, Mvix Ceeno does not need any remote command and / or interactivity for continued operation
  • Auto-Playback: The DS Player starts playing media content as per the playlist and schedule.Mvix Ceeno can be configured to play a single file in looping mode (e.g. for Digital Menu Boards) or a mix of video and image files in a sequential mode (e.g. Product Showcase playlist).
    1.  

      To configure the DS Player for Single File operation, Navigate to the setup menu via the Remote:

      Setup -> Preference -> File Repeat -> "Single"

      This setting will configure the DS Player to seamlessly play a single file continuously without gaps or refresh

      Updating Content in Independent Mode:

      The independent mode operation allows Mvix Ceeno to be updated by a simply USB drive. It does NOT require
      any network cables or connectivity to update media content and playlists / schedules.

      The following simply steps illustrate the process of updating content via a USB drive:

    2. Connect the USB Drive on your PC and create a new folder on the USB Drive
      1. If you would like to update the DS Player content by simply COPYING the content from the USB
        drive, then label this folder "\COPY"
      2. If you would like to update the DS Player content by OVERWRITING the contents from the USB
        drive, then label this folder “\SYNC”
    3. Turn OFF the DS Player
    4. Insert USB drive in the front USB port and turn the device ON.
    5. The DS player will auto-detect USB drive and copy or replace files on the CF card as follows:
      1. If the USB drive contains a folder named "\COPY" - all files in the \COPY folder will be copied to the "\MEDIA" folder on the DS Player’s CF card.
      2. If the USB drive contains a folder named "\SYNC" all files in the CF card's "\MEDIA" folder will be deleted and then all files in \SYNC folder (on the USB drive) will be copied to the "\MEDIA" folder on its DS Player’s CF Card.
    6. If both \COPY and \SYNC folders exist on the USB drive, no files will be copied or deleted.
    7. If neither \COPY or \SYNC folders exist on the USB drive, no files will be copied or deleted.


Article Details
Article ID: 157
Created On: 05 Apr 2010 10:31 AM

 This answer was helpful  This answer was not helpful

 Back
 Login [Lost Password] 
Email:
Password:
Remember Me:
 
 Search
 Article Options
Home | Register | Submit a Ticket | Knowledgebase | Downloads
Language:

Mvix: Solutions for the HD Planet
www.mvixusa.com