NOTE: This reset and flash will reset all of your networking and other settings. 



Mvix (MX-800HD) Ultio Media Center:

1st Process:
1.  Press and hold the power button for 5 seconds.

2.  Plug in the USB drive with firmware (firmware only)

3.  Release the power button and the unit should boot to load the firmware.


2nd process:
1.  Remove power cable

2.  Plug in USB drive (containing firmware only)

3.  Press and hold the power button

4.  Plug in the power cable

5.  Hold power button until the Ultio starts booting,and then release power button